TravelTrucks T1 Alloy Bars - Polished or Powder Coat:

T1 BarLooking for a good looking Bull Bar for your Iveco 4x4?

The T1 Alloy bar is lightweight, strong, and provides good front-end protection while allowing full airflow into and through the motor. Fitting is easy as it bolts directly through the existing Iveco steel bumper and onto the chassis sub frame below.

Powder Coated in Ripple Black to match your existing Iveco Bumper, Powder Coat Hammertone or in High Polished Alloy

All TravelTrucks T1 bars are available with an optional steel chassis mounted winch receiver enabling our Back2Front Winch to be easily attached to the front end for recovery.
See below

 

 

 

T1 Bar 3

Bar is shown with optional Winch Receiver and Driving Lights

 

Bull Bar Type T1 - Polished Alloy    ( TT65.01 )

Bull Bar Type T1 - Ripple Black       ( TT65.02)

Bull Bar Type T1 - Hammertone      ( TT65.03)

 

Supplied & Fitted - Polished            (TZ65.01)

Supplied & Fitted - P/Coat            ( TZ65.02 or 3 )

 

 

 

 TravelTrucks T2 Alloy Bars - Polished or Powder Coat:

T2 Bar 2The T2 Alloy bar is similar to the T1 Bar above however has stronger side protection.

It is lightweight, strong, and provides good front-end protection while allowing full airflow into and through the motor. Fitting is easy as it bolts directly through the existing Iveco steel bumper and onto the chassis sub frame.

 

Note all TravelTruck 'T' Bull Bars allow for full air flow over the Iveco Motor. It is critical not to impede the engine air flow.

 

 

 

 

T2 Bar 3Powder Coated in Ripple Black to match your existing Iveco Bumper, Powder Coat Hammertone or in High Polished Alloy

All TravelTrucks T2 bars are available with a steel chassis mounted winch receiver enabling our Back2Front Winch to be easily attached to the front end for recovery. See below

Bull Bar Type T2 - Polished Alloy     ( TT66.01)

Bull Bar Type T2 - Ripple Black       ( TT66.02 )

Bull Bar Type T2 - Hammertone      ( TT66.03 )

Supplied & Fitted - Polished            ( TZ66.01 )

Supplied & Fitted - P/Coat            (TZ66.02 or 3 )

 

 

TravelTrucks T3 Alloy Bars - Polished or Powder Coat:

 
 
 

 

Front Winch Receivers to suit 'T' Series Bull Bars:

Winch ReceiverTravelTrucks firmly believe that a winch should not be carried at the front end ( see Back2Front Winch)

This front end Winch Receiver is a strong steel bracket that is bolted to the vehicle chassis. It fits neatly within the front BullBar and allows for the winch cradle to be moved here when required.

 

Winch Receiver Front Suit T1,T2 or T3 Bull Bars  
( TT68.01 )
 
 
Supplied and Fitted as Part of BullBar Fitment inc bow shackle     
( TZ68.01 ) 

 

 

 

Radio Aerial/CB Tabs:

Bar Tabs

 

Optional Aerial Tabs on the Top Bar

Care should be taken when fitting after market lights that they do not impede air flow to the Radiator and Intercooler

CB TABS $40 EACH    ( TT68.02 )

 

 

 

 

 

 

 

RidgeLine One Hoop Alloy Bar - Polished or Powder Coat:

RidgeLine Bar Type 1.2

The RidgeLine Bar completely replaces the Iveco Steel Bar

This is a very strong bar, available in Highly Polished Alloy or Powder coated in Ripple Black, Ripple Silver, or Hammertone 

RidgeLine Bar One Hoop in Polished Alloy   
( TT61.02 )
 
RidgeLine Bar One Hoop in Ripple Black    
( TT61.01 )
 
 

Supplied and Fitted - Polished   ( TZ61.02 )

Supplied and Fitted - Ripple Black      ( TZ61.01 )

 

 

 

RidgeLine Three Hoop Alloy Bar - Polished or Powder Coat:

Delux Bar 1

Same bar as the above with extra two hoops to protect the side lights.              ( Note the cross pipe is now deleted)

This is a very strong bar, available in Highly Polished Alloy or Powder coated in Ripple Black, Ripple Silver, or Hammertone

RidgeLine Bar One Hoop in Polished Alloy  
( TT63.02 ) 
 
RidgeLine Bar One Hoop in Ripple Black    
( TT63.01 )
 
 

Supplied and Fitted - Polished   ( TZ63.02 )

Supplied and Fitted - Ripple Black     (TZ63.01 )

 

 

Front Winch Receivers to suit RidgeLine Bars:

Winch Receiver Front CC 1

 

TravelTrucks firmly believe that a winch should not be carried at the front end ( see Back2Front Winch)

This front end Winch Receiver is a strong steel bracket that is bolted to the vehicle chassis. It fits neatly within the front BullBar and allows for the winch cradle to be moved here when required.

Winch Receiver Front Suit RidgeLine Bull Bars  
( TT64.01 )
 
Supplied and Fitted as Part of BullBar Fitment
( TZ64.01 ) 

 

 

 

Radio Aerial/CB Tabs:

Bar Tabs

Optional Aerial Tabs on the Top Bar

Care should be taken when fitting after market lights that they do not impede air flow to the Radiator and Intercooler

CB Tabs $ 40 each        ( TT64.02 )

 

 

 

 

 

 

Powder Coating Colours:

Powdercoat Colours


Left:      Ripple Black ( R )

Middle: Ripple Silver ( S )

Right:   Hammertone ( Z )