12000Lb Back 2 Front Winch:

Winch 12000 1Heavy-duty Sherpa 4WD truck winch of industrial quality with a rated line pull of 12000 Lb or 5454 kg.

The huge 6.6hp motor coupled with the 3 stage planetary gears makes it incredibly powerful.

The drum is wrapped with 45 metres of lightweight but steel-strong synthetic rope.  

Mounting Kit includes: Carry pod, and two handles manufactured specifically for the Back2Front 12000 Lb winch, and Iveco 4x4 rear carry receiver.

All brackets are manufactured from steel and then electro plated providing corrosion resistance that is 6 times higher than hot dip galvanising. 

 

 

 

Water Tap

The Front Receiver is purchased separately as part of a Bull Bar option.

The winch and carry pod tuck up neatly below the tray or Explorers/Camper Module. The winch can be easily used from here or repositioned up front by simply disconnecting the Anderson plug and locking pin.

Back2front 12,000Lb Winch, 45m Syn Cable, Rear Mount and Carry Pod        (TT70.03)
 
 
 
 
 
 
 
 
 
 
Winch isolation
 
Supplied and Fitted, 12000LB winch and carrier electrically wired front and rear with 70sq cable, 2 Anderson plugs, and Battery Isolation Safety switch   (TZ70.05)

 

 

(Does not include house battery/s or house battery carrier or removal of any existing tray to allow free access to chassis)

 

 

 

 

 

17000Lb Back 2 Front Winch

17000Lb Winch 1

Heavy-duty Sherpa 4WD truck winch of industrial quality with a rated line pull of 17000 Lb or 7700 kg.

A 6.6hp series wound motor coupled with the 3 stage planetary gears makes it incredibly powerful.

Comes with 45 metres of lightweight but steel-strong synthetic rope and a single speed retrieval operation.

Mounting Kit includes carry pod manufactured specifically for the Back2Front 17,000Lb winch and an Iveco 4x4 rear carry receiver.

All brackets are manufactured from steel and then electro plated providing corrosion resistance that is 6 times higher than hot dip galvanising.

 

 

17000Lb Winch 2

The Front Receiver is purchased separately as part of a Bull Bar option.

 

The winch and carry pod tuck up neatly below the tray or Explorers/Camper Module. The winch can be easily used from here or repositioned up front by simply disconnecting the Anderson plug and locking pin.

 

Back2front 17,000Lb Winch, 45m Syn Cable  (TT73.01)

 

 

 

 

Winch isolation

 

17,000LB - Supplied and Fitted, electrically wired front and rear with 70sq battery cable, 2 Anderson plugs, and Battery Isolation Safety switch                Rear Mount & Carrier  (TZ71.05)
 

 

Note: Heavy duty cable, fully insulated, quality fittings and workmanship. Isolation switch with removable key/cap so winch cannot be operated without fitting key.

 

 

 

 

 

Rear Winch Carry Bracket & Receiver:

Winch Receiver Rear

Rear Winch Receiver and backing plate bolts to the Pintle Tow Hook mount in the vehicle final cross member. This is a 3500Kg rated tow point for the vehicle.

Each Winch Carry Pod is custom designed specifically for either the 12,000 or 17,000Lb Sherpa Winch and the Iveco vehicle.

 

Available only with a Winch Kit as outlined above

 

 

 

 

  

Front Winch Receivers to suit 'T' Series Bull Bars:

Winch ReceiverTravelTrucks firmly believe that a winch should not be carried at the front end.

 

This front end Winch Receiver is a strong steel bracket that is bolted to the vehicle chassis. It fits neatly within the front BullBar and allows for the winch cradle to be moved here when required.

 

 
Supplied and Fitted as Part of BullBar T1,T2 or T3 Bull Bar Fitment     (TT68.01)

 

 

 

 

 

Front Winch Receivers to suit RidgeLine Bars:

Winch Receiver Front CC 1

 

TravelTrucks firmly believe that a winch should not be carried at the front end.

This front end Winch Receiver is a strong steel bracket that is bolted to the vehicle chassis. It fits neatly within the front BullBar and allows for the winch cradle to be moved here when required.

 

Supplied and Fitted as Part of RidgeLine BullBar Fitment